testas
Cold lacquer (100 ml)
Degreaser - cleaner
Applicator
Microfiber cloth
Protective gloves
1. Wash and dry – the car body must be clean and completely dry.
2. Degrease – clean the area to be coated with the degreaser-cleaner included in the kit.
3. Apply – using an applicator, with even straight movements. The coating levels itself in ~2 minutes, so do not return to an already coated area.
4. Drying – protect from rain and moisture for the first 24 hours. The coating fully hardens within 48 hours.
100 ml is enough for approximately half a car.
We deliver to parcel lockers within 1–2 business days. For orders over €39, delivery is free of charge.
An unopened kit can be returned within 14 calendar days (only the entire kit is returnable). If the protective packaging is damaged or the chemical products are opened, the kit cannot be returned due to health protection and hygiene reasons – more information in the Return Policy.
Detailed instructions
The better you prepare the surface, the more beautiful the gloss will be and the longer the coating will last.
Preparation (the most important part)
Wash the surface
Thoroughly wash the bodywork and remove any residue from old products, such as wax or other protective coatings. The final result largely depends on the preparation.
Dry thoroughly
The surface must be completely dry. Do not apply the product to a damp surface.
Degrease the surface
Clean the area you will be covering with the degreaser/cleaner included in the kit. After degreasing, try not to touch the surface with your hands.
Application
Shake the bottle and moisten the applicator
Shake the bottle well before use. Apply enough product to the applicator to evenly moisten the working side of the applicator. If you feel the applicator starting to dry out during application, apply a little more product.
Apply to the body
Start with the upper body and move downwards. Apply the applicator very lightly, moving in straight strokes from one edge of the chosen body part to the other. Distribute the product evenly, without strong pressure.
Let the coating self-level
After applying the coating, it self-levels in approximately 1–2 minutes. After this time, do not return to the already coated area and do not re-apply the coating.
Drying
Allow to dry
For the first 24 hours, protect the car from rain, water, and moisture. If covering outdoors, ensure no precipitation is expected for the next day. The coating fully hardens within 48 hours. After that, it can be maintained like a regular car paint surface.
If you made a mistake
If the coating is still fresh and has not yet hardened, it can be cleaned within the first few minutes using the degreaser-cleaner included in the kit, and the area can be recoated.
Common mistakes
- Surface not cleaned or not degreased properly
- Returning to an already coated area
- Overly dry applicator
- Rain or moisture within the first 24 hours
- Application on a hot body or in direct sunlight
Tips
- 100 ml is enough for about half a car. You can also apply it in sections – the transition should not be visible.
- We recommend using protective gloves.
Frequently Asked Questions
Up to 3 years. The exact time depends on the conditions of use - heat, cold, sun, chemicals used, etc.
It depends a lot on how the car is used and on environmental conditions, so it's difficult to say precisely. Faster wear is caused by heat, constant direct sunlight, automatic car washes, and harsh chemicals.
100 ml is enough for about half a car.
Yes, you can. The transition won't be visible if the untreated part is not very faded.
It can also be applied outdoors if no rain is expected for the next 24 hours.
Yes. It's essentially a material that can be used instead of polishing – to remove micro-scratches and enhance color.
No. The applied coating self-levels for about 2 minutes.
Yes, the coating levels out as it dries. Once fully cured, it can be used as a regular lacquer.
Yes, polishing can be done after 48 hours.
Yes, it repels water well and withstands washing without problems.
This is not ceramics, but a "clear coat" layer. You can apply it without gloves if you know how, but we recommend wearing them.
The peeled area, which no longer has lacquer, will start to shine. However, if you don't sand the surrounding contour, the transition will still be visible.