Wet-look gloss without polishing
Apply with the applicator. The coating self-levels, so polishing is not required. Deep gloss and hydrophobic protection last up to 3 years.
Tested on various cars
We are showing how the coating works on different car bodies and parts.
The shine you'll see instantly
Brighter color, smoother surface and deep wet-look gloss.
Before
After
Deep shine without polishing
Wipe-on cold lacquer, which lasts up to 3 years.
Admshine cold varnish
In the set
- Wipe-on cold lacquer
- Degreaser – Cleaner
- Microfiber cloth
- Applicator and gloves
Steps to shine
Wash
Thoroughly wash the vehicle.
Dry
Dry the vehicle.
Degrease
Degrease the vehicle.
Apply
Thoroughly moisten the applicator and apply the product.
Drying
Dries in 4 hours. Keep dry for at least 24 hours.
Frequently Asked Questions
Up to 3 years. The exact time depends on the conditions of use - heat, cold, sun, chemicals used, etc.
This heavily depends on how the car is used and on environmental conditions, so it's difficult to say precisely. Faster wear is caused by heat, constant direct sunlight, automatic car washes, and strong chemicals.
100 ml is enough for about half a car.
Yes, you can. The transition won't be noticeable if the untreated area is not significantly faded.
It can also be applied outdoors, provided no rain is forecast for the next 24 hours.
Yes. It's essentially a material that can be used instead of polish – to remove micro-scratches and enhance color.
No. The applied coating levels itself for about 2 minutes.
Yes, the coating self-levels as it dries. Once fully cured, you can treat it just like regular clear coat.
Yes, polishing is possible after 48 hours.
Yes, it repels water well and withstands washing without problems.
This is not ceramic, but a "clear coat" layer. If you know how to apply it, you can do it without gloves, but we recommend wearing them.
The peeled area, which no longer has lacquer, will start to shine. However, unless you blend and buff the surrounding edge, the transition will still be visible.